Saturday, February 29, 2020

The Bunny Circus Eggstravaganza

The March kit from Alpha Stamps is here! So many chicks and bunnies; spring is on the way, which means Easter is not far behind. I love some Easter art, but I found a collage sheet entitled "Circus Chicks", and you sure can't go wrong with that! I made my Little Niche Egg shrine into a tiny springtime circus, because why not?

I fell in love with the little chick in its clown costume, and decided to work around him. Sure, he's not a bunny, but he is, at least, now sporting the bunny ears. For the background, I found the perfect circus image from the Big Top Circus collage sheet, and made it the background of my niche. I used two copies of the circus collage sheet so I could cut out the flags and banners and attach them with foam tape for added dimension. I also cut out the ball, and attached it with two layers of foam tape to bring it to the forefront.

Every circus needs a ringmaster, but the rabbit image I wanted to use had his head facing away from the action. I cut out the body of that rabbit and used the head from a different rabbit from the same collage sheet. Now he's paying attention!

The chick on the collage sheet appears to be wearing an eye patch, so I colored the patch yellow to match his head, and added a couple of crazy eyes. The eyes I used are designed for fishing flies; they were the perfect size for this crazy little clown chick. Because the eyes are plastic, it was easy to trim his left eye so it looks like it sits behind his beak. I also gave him some bunny ears, cut from the original head of the ringmaster bunny. Now he fits in with the other rabbit performers.

Here are a few photos of how this project came together. I first chose the image of the chick, and the circus background, and then the perfect piece of scrapbook paper from the Echo Dot Summer Dots and Stripes 6x6 pad that coordinated with those colors. The dotted paper was glued to the egg, and then carefully trimmed with an x-acto knife. Some baker's twine was glued around the outer edge. The circus image was adhered to the back and sides of the cardboard niche, which was then glued together with white glue. Clothespins work great for holding things together while the glue dries.

The niche was put in place and the flaps glued to the back of the egg. Masking tape held down the flaps during drying time. The hanger was also glued on at this time.

White Dresden trim around the opening reminds me of those sugar eggs with the scene in them that I used to love as a kid. I tried it out to make sure I liked it before gluing it down. In the photo below, the flags in the circus background have not yet been doubled up. That was my next step.

See how the flags pop, now that there's an extra layer? After the egg was put together, the outside was decorated with all the elements. The chipboard grass was greened up with a combo of paint and colored pencils. I used three clusters to make the Easter grass that the egg sits in.
Thanks for visiting the bunny circus! For a complete list of supplies, click here.

Thursday, February 20, 2020

Teeny Tiny Circus Shriney

I had the smallest of jeweler's tins sitting around for the longest time, and decided to make a tiny shrine out of it. Luckily, I found a teeny tiny image of an elephant, so of course I made a circus shrine. It sits on a bead cap, and features some miniscule sequined stars. Here it is, with a penny for scale.

Not much else to say about this one. 😀

Saturday, February 1, 2020

KCTV, Altered Tin, with Tutorial

It's February,  and who's ready for some valentines? Me and Alpha Stamps, that's who! Let's tune in to KCTV (KittyCat TV, of course) for some good old-fashioned Valentine's Day fun. I love the vintage charm of these cheerful kittens; they remind me of my elementary school days, and valentines from my classmates.


The new retro tv, designed for use with Altoids sized tins, is perfect for this sweet kitty scene. And these cats know how to celebrate! Some happy sprinkles make this Valentine's party extra festive. I pulled a few hearts out of the sprinkles for little dimensional accents behind the kitten's heads, and on the front of the television.

Even the back of the tv is full of feline love.

Here's how KCTV was built. After deciding the theme of the program, I first decorated the tin. The cats were all cut out, then layered with foam tape to give dimension. A thick layer of glue was applied to the bottom of the tin, which was then sprinkled with... sprinkles! In the photo below, you can see the speaker vents in the upper corner of the tv. I wanted to preserve those, so I colored that area with a red marker so they will match the red paper that will be used on the front.

To cut the paper where the vents will show through, I traced the tv on the wrong side of the paper, and used a pencil to mark where the vents are. I then used an x-acto knife to cut out one hole for the vent area.  I used a red marker to draw around the opening. This will help this area blend in with the red paper. Then, the front of the tv was glued down and cut out along the edges with the x-acto.

Below you can see the finished front of the tv, and the back of the back. I did not put paper on the entirety of the insides of the tv, as the back of each piece won't show once it's fully constructed. The "brass" bottoms of the legs were painted with gold metallic paint, and a silver Sharpie was used for the antenna. A grey Copic marker was used on the red legs to make them look like they're set back a bit from the tv cabinet. I used a red Copic marker around the lip of the tin, in case any showed through once the tv facade was attached. A little bit of the turquoise paper is glued behind the speaker.

Here's how to make sure your tv is sturdy: glue the tin to the front of the tv first. Once that's good and dry, put lots of glue on the back of the tin and sandwich the two parts together. While the glue is wet, use some blocks (or whatever you have handy that will work) to make sure the back and front are exactly lined up. Let dry.

Once it's completely dry, you can add the antennas, paint the knobs and add any other embellishments to the front and call it a day. I did want to add some sides, though. A 12" long piece of the same red scrapbook paper is just enough to go from the outside of one leg, all around the top and other side of the tin, to the outside of the other leg. Cut the paper to the width of the side. I cut a notch in the paper to accommodate the antenna, so I glued the paper at the top of the tv first. Then one side at a time, I glued the paper around the curves. Be patient and hold that paper in place for a bit while it dries! You'll have to trim the paper a bit when it gets to the legs. I went ahead and cut another piece to finish the bottom. That piece was notched for the legs as shown below.

Now sit back and enjoy the show! 💕 For a complete list of supplies, click here.