Wednesday, September 2, 2020

Welcome to the Nut House

Hello, and welcome to the Nut House. A squirrel lives here! This whimsical mushroom house kit from Alpha Stamps almost made me forget how effed up 2020 is. Almost. At least it was a fun distraction.  

The house comes with a niche, so it's easy to make a front room. A little sugar glider has moved in, and he brought a large acorn along with him.

The squirrel is very happy in his new home. The staircase is designed with two steps; I added a little landing at the doorway. 

This squirrel appreciates a nice garden. The yard is made with a combo of Field Grass, Green Turf Grass, Leafy Green Underbrush, and Clump Foliage, which makes for beautiful red flowers along the path. The path is composed of Miniature Brown Path Pebbles and "stones" made from egg cartons (click here for a tutorial on making egg carton stones).  Oh look, there's some mail!  

The mailbox pretty easy to make. The bottom of the box was made from a rectangular shutter that was included in the door and window set made especially for the mushroom house. I painted it black and then glued a strip of black card stock to each side to make the rounded top. Once the top was in place, I put a thin bead of glue on the back of the box and set it on the card stock. Once that glue was dry, I carefully cut around the edge to make the back of the box. In the photo on the right, you can see how the door was made: a piece of the card stock is trimmed to fit the opening, with extra paper to go up under the bottom. This will allow the door to open and close. The flag was attached with a tiny brad.

The mailbox stands on a painted wooden spindle. The enclosed letter is written with a .05 pen on typing paper, and the envelope was made with the same. The "postcard" is a label from a collage sheet, mounted on thin cardboard and trimmed. That's a teeny tiny letter! It's pictured below on a 1" grid.

A little bit about how the house was made: once it was decorated front and back, and the niche was in place, I cut strips of paper to finish the sides. All it takes is a thin line of glue on the sides of the cardboard to attach those pieces. It's best to do a little bit at a time, so you can hold the paper in place while the glue dries. My house isn't exactly uniform, and some parts were wider than others, so I cut the strip a little wider than necessary and lined it up with the front of the house. After the glue was dry, I carefully trimmed the excess paper in the back with an x-acto knife.

Here's the house in position on the base. It's easy to put the mailbox in place, as the spindle it stands on has little pegs at each end. I punched a little hole in the base to insert the peg. A dab of glue holds it tightly in place. This is the time to draw the sidewalk in, so you know where to put down your stones. I made the sidewalk before gluing the mushroom down. Once the sidewalk was done, I glued on the mushroom and  the yard was "planted" using white glue.

I hope you enjoyed looking at the Nut House. Need supplies? Click here!


No comments:

Post a Comment