Cheers, Marie! Altered Altoids Tin

I'm not sure if anyone was drinking Cosmopolitans back in Marie Antionnette's day, but I'm pretty sure that if they were, Marie would have been a huge Cosmo fan. I know I am! In fact, we've made a dedicated Cosmo party shelf in our kitchen, where our martini glasses, the shaker, and a little container of  rim sugar are kept. It also includes some Cosmo artwork; some by me, some by my friends. When I got this month's kit from Alpha Stamps, all the pink reminded me of that shelf, and I decided to let Marie enjoy a Cosmo, at long last. Cheers, Marie!

I removed the cover of the tin, and covered the inside with some gorgeous pink floral paper, plus some black and white harlequin paper from my stash. I found a gold dollhouse frame which was the perfect size to frame a quote featured on some of that kit paper, which reads, "Life is nothing without passion". Ain't that the truth?

The outsides of the tin are also covered harlequin paper, and then adorned with some gold Dresden trim. A string of little red beads sits atop the rim. In the photo below, you can see that Marie's yellow overdress overlaps her pink skirt a bit. I used two French Ballet Costumes collage sheets to achieve this look. I cut the yellow overdress at the "v" of the bodice and glued it only at the waistline of a full image of Marie. A couple of foam tape squares were inserted between the overdress and the skirt to separate the layers. Marie is adhered to the tin with 4 layers of foam tape, so she really stands out.

A gold crown brad was the perfect little topper for the tin. The prongs were easy to fold flat into the base of the crown. A large flat-backed crystal fit perfectly inside the crown and hid the folded prongs. At the angle of the next photo, you can see the stacks of foam tape helping keep Marie front and center.

 

 A few tips on construction:

The Marie from the collage sheet has her arms spread out as if she is dancing. It's a beautiful pose, but it's not conducive to enjoying a drink, nor did her arms allow her to fit inside the tin. Here's how to change her position. In the top half of the image below, there are two identical images of Marie. The left image is the one that will be used in the tin. Her right arm is cut off at the elbow, and her left arm is cut at the shoulder. The duplicate image at the right has already had the overskirt removed. Both its arms are cut at the shoulder. Her wand is removed from the right hand, and her hand is removed from the left arm. When her left arm is hanging down, that hand is not in the correct position. Therefore, I used another image from the same collage sheet, and Marie was given a hand transplant.  When you position this new left arm on Marie, there is a little gap at the shoulder. It's easy to fill that in with a little piece of one of the unused arms. You'll just have to trim it to fit.

The beads aren't tough to adhere to the edge of the tin, but they do require some patience. You will have to really babysit them while the glue dries. It's best to glue only 2 or 3 inches at a time. I use Aleene's Tacky glue. I put it on fairly goopy, but it's invisible when it dries.

While it is drying, you'll need to hold it in place. Those beads are going to want to fall off the lip of that tin. One thing that helped me keep my sanity during this step was to lean the side of the tin up against a flat surface. You'll still have to keep checking it until it's fully dry, but it helps keep the beads in place. Make sure you stop and start your beaded strand in on one of the sides, not at the corners.

For a complete list of supplies, click here! And now, how about a little bonus photo of that Cosmo shelf? Yes, it has party lights.